About   |  Calender   |  DataAccess   |  What'sNew   |  Documents   |  Applications
The GODAE High Resolution Sea Surface Temperature Pilot Project
Enquiry Form
User Feedback
Site Map
About Us
User Requirements
Data Access
What's New
Science Team

The GHRSST-PP International Project Office is sponsored by ESA and the Met Office

Click here to go to the Met Office website Click here to go to the European Space Agency website
More Sponsors >
National Flags for UK, USA, Japan, Australia, France, India, Italy, Spain, Canada, China, Norway, Denmark and Germany
Your Location: Home Definitions of SST

Understanding Sea Surface Temperature

SST is a difficult parameter to define exactly because the upper ocean (~10 m) has a complex and variable vertical temperature structure that is related to ocean turbulence and the air-sea fluxes of heat, moisture and momentum. Definitions of SST provide a necessary theoretical framework that can be used to understand the information content and relationships between measurements of SST made by different satellite and in situ instruments. The following SST definitions were agreed at the 2nd and 3rd GHRSST-PP workshops. Each SST definition has been carefully considered by the GHRSST-PP Science Team in order to achieve the closest possible coincidence between what is defined and what can be measured operationally, bearing in mind current scientific knowledge and understanding of how the near surface thermal structure of the ocean behaves in nature.

Definitions of SST within the GHRSST-PP

Figure 1 presents a schematic diagram that summarises the definition of SST in the upper 10m of the ocean and provides a framework to understand the differences between complementary SST measurements. It encapsulates the effects of dominant heat transport processes and time scales of variability associated with distinct vertical and volume regimes of the upper ocean water column (horizontal and temporal variability is implicitly assumed). Each of the definitions marked in the bottom right of the figure is explained in the following sub-sections.

  • The interface SST (SSTint) is a theoretical temperature at the precise air-sea interface. It represents the hypothetical temperature of the topmost layer of the ocean water and could be thought of as an even mix of water and air molecules. SSTint is of no practical use because it cannot be measured using current technology. It is important to note that it is the SSTint that interacts with the atmosphere.
  • The skin SST (SSTskin) SSTskin is defined as the radiometric temperature measured by an infrared radiometer operating in the 10-12 micrometer spectral waveband. As such, it represents the actual temperature of the water across a very small depth of approximately 20 micrometers. This definition is chosen for consistency with the majority of infrared satellite and ship mounted radiometer measurements. SSTskin measurements are subject to a large potential diurnal cycle including cool skin layer effects (especially at night under clear skies and low wind speed conditions) and warm layer effects in the daytime (although the latter are not shown in Figure 1).
  • The sub-skin SST (SSTsub-skin) represents the temperature at the base of the thermal skin layer. The difference between SSTint and SSTsubskin is related to the net flux of heat through the thermal skin layer. For practical purposes, SSTsubskin can be well approximated to the measurement of surface temperature by a microwave radiometer operating in the 6-11 GHz frequency range, but the relationship is neither direct nor invariant to changing physical conditions or to the specific geometry of the microwave measurements. SSTsubskin is the temperature of a layer ~1mm thick at the ocean surface.
  • SSTdepth or SST(z) is the terminology adopted by GHRSST-PP to represent an in situ measurement near the surface of the ocean that is typically reported simply as SST or "bulk" SST. For example SST6m would refer to an SST measurement made at a depth of 6m. Without a clear statement of the precise depth at which the SST measurement was made, and the circumstances surrounding the measurement, such a sample lacks the information needed for comparison with, or validation of satellite-derived estimates of SST using other data sources. The terminology has been introduced to encourage the reporting of depth (z) along with the temperature.
    All measurements of water temperature beneath the SSTsubskin are obtained from a wide variety of sensors such as drifting buoys having single temperature sensors attached to their hull, moored buoys that sometimes include deep thermistor chains at depths ranging from a few meters to a few thousand meters, thermosalinograph (TSG) systems aboard ships recording at a fixed depth while the vessel is underway, Conductivity Temperature and Depth (CTD) systems providing detailed vertical profiles of the thermohaline structure used during hydrographic surveys and to considerable depths of several thousand meters and various expendable bathythermograph systems (XBT). In all cases, these temperature observations are distinct from those obtained using remote sensing techniques and measurements at a given depth arguably should be referred to as 'sea temperature' (ST) qualified by a depth in meters rather than sea surface temperatures. The situation is complicated further when one considers ocean model outputs for which the SST may be the mean SST over a layer of the ocean several tens of meters thick.
  • The Foundation SST (SSTfnd) is defined as the temperature of the water column free of diurnal temperature variability or equal to the SSTsubskin in the absence of any diurnal signal. It is named to indicate that it is the foundation temperature from which the growth of the diurnal thermocline develops each day. SSTfnd provides a connection with historical "bulk" SST measurements typically used as representative of the oceanic mixed layer temperature. This definition was adopted by GHRSST-PP at the Third GHRSST-PP Workshop (Donlon, 2003b) to provide a more precise, well-defined quantity than previous loosely defined "bulk" temperature quantities and consequently, a better representation of the mixed layer temperature. The SSTfnd product provides an SST that is free of any diurnal variations (daytime warming or nocturnal cooling). In general, SSTfnd will be similar to a night time minimum or pre-dawn value at depths of ~1-5 m, but some differences could exist. Only in situ contact thermometry is able to measure SSTfnd. SSTfnd cannot be directly measured using either microwave or infrared satellite instruments. Analysis procedures must be used to estimate the SSTfnd from radiometric measurements of SSTskin and SSTsubskin.

About   |   Calender   |   Data Access   |   What's New   |   Documents   |   Applications   |   Site Map
Facilities provided by the Met Office Crown Copyright © 2005
Site maintained by
Craig Donlon | Last updated on 10th October 2005